ÇEKSAN - PRODUCTS - VKM-10000 Truck Mounted Sweeper




Çeksan makes production of Mechanical Driven Vacuum Road Sweeping Machines (Torque Convertor or Clutch lining), and Hydraulic Driven Vacuum Road sweeping machines with chamber capacity from 4 m³ up to 10 m³.

General features of Vacuum Road Sweeping Machines (VKM) are as follows:
• It provides high performance at lower cycles by the choice of correct auxiliary engine utilized on its top structure. It ensures fuel savings and more silent working environment.
• In order to maximize useful life of brush, its pressure to the surface can be adjusted. Optionally, such pressure setting can be made from cabin inside. It provides optional system reducing rotating speed of brush preventing unnecessary wear.
• In order to minimize dust in the environment, waste is humidified at correct points throughout suction line.
• Engine- fan connection is made through torque convertor in our mechanical machines; in this way, engine life is extended and maintenance costs resulting from replacement of clutch lining is prevented.
• Thanks to flexible design, top structure can be easily mounted to different chassis vehicles of different sizes.
• Thanks to user friendly control panel, operator learns using machines within a short time period.
• Water tank mounted on base of waste tank at 10 degrees of angle provides ease for discharge operation of wastes.
• Easily cleanable chamber inside grate design is developed; design of superstructure and equipments is made to minimize maintenance requirements.


Sweeping Speed (km/h) 0-15
Sweeping Width (mm) 2400
Sweeping Capacity (m²/h) 21500
Hopper Tank Capacity (m³) 10
Water Tank Capacity (liter) 2400
Hydroulic Oil Tank Capacity (liter) 80
Water Tank Material Stainless Steel
Machine Length (mm) 6145
Machine Width (mm) 2300
Machine Height (mm) 2040
Empty Total Weight (kg) 6500
Water Pump 20 lt./min. Max.100 bar
Discharge Angle 55°
Discharge Height (mm) Nominal 650
Side Brush Diameter (mm) 450
Middle Brush Diameter (mm) 400
Middle Brush Length (mm) 1240
Number of Water Nozzle (pc) 25
Rear Scution Hose Diameter (mm) 150
Rear Suction Hose Length (mm) 5000
Auxiliary Engine Type Diesel
Auxiliary Engine Power (kw) 75
Fan Drive Type Mechanical
Side Suction Hose Diameter (mm) 220
Minimum Gross Weight (kg) 21000
Wheel Base (mm) 4250
Axle 6x4
PTO Not Necessary
Air Compressor Needed
Cabin Single
Rear Door Opening Angle 110°
Mesh Filter Surface Area (m²) 1,09
In Cab Noice (db) <75
Dual Suction System Optional
High Pressure Washing System Optional
Rear Camera Optional